VERSA LIFT MODEL 24 ATTIC LIFT VARIABLES
Technical Information
Which Size to Order
Make sure you measure from ATTIC FLOOR UPSTAIRS down to GARAGE FLOOR for correct unit height.
NOT FLOOR TO CEILING.
We can go up to 20’ in increments: 8-11’, 11-14’, 14-17’, 17-20’
Need some help?
Call us at 405-516-2412, M-F 9-5 CST.
As Seen In
Power and Capacity
Versa Lift™ is a very powerful electric lift that uses a specially milled and grooved shaft connected to a 110v 5 amp motor to lift your keepsakes, decorations, and valuables into the attic or spare room of the home. It has also been known to be installed in decks, basements, spare closets, pantries, and even bedrooms. You can build an enclosure over the unit for outside rooftops or beach decks. It works great for lifting luggage, ice chests, and storage bins. The Model 24 can handle two of those large Rubbermaid-type tubs and up to 200 lbs. Usually, it is not the weight but the bulk of the boxes. The Model 24 is 15.5 cu. ft. and can go up to 20' floor to floor.
Convenience
Versa Lift™ is more convenient than a monthly rental storage facility and a lot more secure in your home attic away from floods, moisture, and unwanted insects. All you do is push a button and those valuables you have been collecting for years go up into the attic with ease.
Safety
Scaling a shaky attic ladder is dangerous and scary. Falling off that ladder can cause serious bodily harm and even death. The Versalift allows you to move things into and out of the attic with the touch of a button safely and easily compared to trying to shove those things up a ladder or carry them up or down a staircase. Protect your loved ones today by adding an attic lift and a VersaRail attic ladder safety rail.
102 Reviews
FAQ
Which floor to floor size should I order? And why floor to floor NOT floor to ceiling?
The lift mounts on top of the Attic Floor Decking.... so simply measure from the attic floor upstairs to the garage floor downstairs. DO NOT measure floor to ceiling. Once you have your measurement, select the increment that matches your floor to floor distance. We can go up to 20’ in increments: 8-11’, 11-14’, 14-17’, 17-20’.
When the lift goes into the attic, do I have to adjust the lift so I'm not reaching down into a hole to get stuff off?
There are 4 springs up inside the lift that connect to the ceiling cover which is made of Powder Coated Steel. When the lift goes up through the framed out opening, the springs hold the ceiling cover door tight against the ceiling and the lift continues to travel until it gets flush with the floor of the attic at which time it automatically shuts itself off. You can also add insulation tape or sheets to the door ceiling cover to insulate it in the winter if desired.
What are the Framing Dimensions for each unit?
MODEL 24 = 22.5" x 46.5" Allow minimum 4' Headroom in attic x 58.5" (motor head extends out 12" past framed opening) It can be on either end...
MODEL 32 = 30.5" x 58.5" Allow minimum 5' Headroom in attic x 70" (motor head extends out 12" past framed opening) It can be on either end...
Note: Model 24 is available with 36" Legs at no additional fee with initial order. Either unit can be modified (cut down only) for additional fee $450.
Need a larger lift?
The Versalift Model 32 can hold up 35 cu. ft. with a weight capacity of 250lbs! Move your belongings into the attic faster with the Model 32!