TL-24 Truss Leg Kit. For applications where angled roof supports interfere with the standard mounting feet of the lift, these allow the lift to sit right on the trusses. In Question? (405) 516 2412
VeraLift Accessories: TL-24 Truss Leg Kit
Allows MODEL 24 to be installed between 24″ O.C. trusses.
The Truss Leg Kit adapts the VersaLift Model 24 for installation in homes with truss roof construction on 24″ centers. The FLOOR MOUNTING BRACKETS on the standard housing legs supplied with the Versa Lift will not normally fit between roof trusses on 24″ centers. (Where they mount in the floor). If your current trusses look like this picture, you should NOT need the Truss Leg Kit. However, if the Floor Mounts of the standard Versalift are blocked by the Roof Trusses, you will probably need the Truss Leg it. Roof trusses should never be cut or modified because each member is load-bearing within the assembly.
For this reason, the Truss Leg Kit was specially designed with housing legs that will fit between roof trusses on 24″ centers. The Truss Leg Kit includes the additional hardware (bolts & screws) needed for assembly. The following manual gives you pictures to determine whether you need the Truss Leg Kit or not. If you order and do not need the kit, you may return it for a refund less shipping costs.
Download the TL-24 Installation Manual and installation instructions here.
If your attic is constructed of "scissor trusses" as shown above you may need this kit if the floor mounts are blocked by the Roof Trusses.